Power Cleaning:
Select this feature to replace all of the ink inside the ink tubes. More ink is consumed than in usual
cleaning. See the "Related Information" below for details on using this feature.
Print Head Alignment:
Select this feature to adjust the print head to improve print quality.
❏ Vertical Alignment
Select this feature if your printouts look blurry or text and lines are misaligned.
❏ Horizontal Alignment
Select this feature if horizontal banding appears at regular intervals in your printouts.
Reset Ink Level:
Select this feature to reset the ink levels to 100% when relling the ink tank.
Paper Guide Cleaning:
Select this feature if there are ink stains on the internal rollers.
e
printer feeds paper to clean the
internal rollers.
Related Information
&
“Checking and Cleaning the Print Head” on page 147
& “Running Power Cleaning” on page 149
& “Aligning the Print Head” on page 150
& “Relling the Ink Tanks” on page 142
& “Cleaning the Paper Path for Ink Smears” on page 151
Menu Options for Printer Setup
Select the menus on the control panel as described below.
Settings > Printer Setup
Paper Source Settings:
Paper Setting:
Select the paper size and paper type you loaded in the paper source.
A4/Letter Auto Switching:
Select On to feed paper from the paper source set as A4 size when there is no paper source set
as Letter, or feed from the paper source set as Letter size when there is no paper source set as
A4.
Error Notice:
Select On to display an error message when the selected paper size or type does not match the
loaded paper.
User's Guide
Preparing the Printer
59