Epson L5190 Series User Manual

13. On the printer's control panel, press the OK button.
For smart devices that have been connected to the printer before, select the network name (SSID) on the smart
device's Wi-Fi screen to connect them again.
Related Information
& “Connecting to Devices other than iOS and Android using Wi-Fi Direct” on page 28
& “Printing from Smart Devices” on page 104
Connecting to Android Devices using Wi-Fi Direct
is method allows you to connect the printer directly to your Android device without a wireless router. e
following conditions are required to use this function.
❏ Android 4.4 or later
❏ Epson iPrint version 7.0 or later
Epson iPrint is used to print from a smart device. Install Epson iPrint on the smart device in advance.
Note:
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1. Select Wi - F i S e t u p on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
2. Select Wi - F i D i r e c t .
3. Check the message, and then press the OK button to proceed.
4.
Check the message, and then press the OK button to proceed.
User's Guide
Network Settings
26

Epson L5190 Series Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 DPI
Scanner Type	Flatbed color image scanner
Ink Type	Dye Ink
ADF Capacity	30 sheets
Copy Function	Yes
Fax Function	Yes
Scan Resolution	1200 x 2400 DPI
Duplex Printing	Manual
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Paper Sizes	A4, A5, A6, B5, Letter, Legal
Functions	Print, Scan, Copy
Print Speed (Color)	5 pages/min
Paper Handling Input	100 sheets
Ink Bottles	Black, Cyan, Magenta, Yellow
Ink Tank Capacity (Color)	70 ml
Mobile Printing	Epson iPrint, Google Cloud Print
Display	1.44" LCD screen
Dimensions (W x D x H)	375 x 347 x 237 mm
Printer Type	All-in-One