Epson L5190 Series - Placing Originals on the ADF

❏ Originals that have stickers or labels stuck to them
❏ Originals that are cut irregularly or not right angled
❏ Originals that are bound
❏ OHPs, thermal transfer paper, or carbon backs
Placing Originals on the ADF
1. Align the edges of the originals.
2. Slide out the ADF edge guide.
3. Place the originals face-up and short edge
rst
in the ADF, and then slide the ADF edge guide to the edge of
the originals.
c
Important:
❏ Do not load originals above the line indicated by the triangle symbol on the ADF.
❏ Do not add originals while scanning.
User's Guide
Preparing the Printer
53