3-16 Using the Printer Software
R4C4610
Rev. C
A5 size SOFTWARE.FM
6/28/00 Pass 3
L
Proof Sign-off:
SEI Y.Ohkawara K.Kono
K.Kono
SEI M.Kauppi
Utility menu
To use the utilities, click the
Utility
tab in the printer software
window, then click the button for the utility you want to use.
If you are using NT 4.0, you can open the printer software window
by selecting
Properties
from the printer folder.
Note:
EPSON Status Monitor 3 is available only when:
❏
The printer is connected directly to the host computer via the parallel
port [LPT1].
❏
Your system is configured to support bidirectional communication.
❏ EPSON Status
Monitor 3
You can access EPSON Status Monitor
3 when you click this button. For
details on the Printer Status Window,
see page 3-35. Whenever you monitor
the printer, make sure there is a
checkmark in the
Monitor the printing
status
check box.
❏ Monitoring
Preferences
Click this button to open the
Monitoring Preferences dialog box
where you can make settings for
EPSON Status Monitor 3.
To Next Page
Loading...
Need help?
General
