Epson RC90 User Manual

2. Installation
RC700 / RC90 Option Fieldbus I/O Rev.14 145
If it cannot communicate with the slave device, the following dialog box appears.
Connections Parameters that are set for the Fieldbus master board and information of
the slave device may not be matched.
Connections Parameters for the Fieldbus master board can be checked by the
following procedure.
First, select the slave device which is registered to the Fieldbus master board.
Then, click the left mouse button and select [Properties].

Epson RC90 Specifications

General

Brand	Epson
Model	RC90
Category	Controller
Language	English