2. Installation
158 RC700 / RC90 Option Fieldbus I/O Rev.14
Installing Software
Installing device driver
Before adding EtherNet/IP board manufactured by Hilscher to the PC with the
EPSON RC+ 7.0 installed, you must install the Hilscher SYCON.net application and
drivers according to the type of the board you are using.
1. Insert Communication-Solutions DVD into the PC with EPSON RC+7.0 installed.
2. Execute Communication-Solutions.exe.
When Windows Security Alert appears, do not click <Cancel> and proceed to the next
step.
3. The [Communication Solutions] window appears.
Select “Install cifX / netJACK Device Driver”.
To Next Page
Loading...
