Epson RC90 User Manual

RC700 / RC90 Option Fieldbus I/O Rev.14 iii
TRADEMARKS
Microsoft, Windows, Windows logo, Visual Basic, and Visual C++ are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries.
Pentium is a trademark of Intel Corporation in the United States.
DeviceNet™ is a registered trademark of ODVA (Open DeviceNet Vendor Association,
Inc.).
EtherNet/IP™ is a trademark used under license by ODVA (Open DeviceNet Vendor
Association, Inc.).
PROFIBUS and PROFINET are registered trademarks of PROFIBUS International.
CC-Link is a registered trademark of the CC-Link Partner Association.
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff
Automation GmbH, Germany.
Other brand and product names are trademarks or registered trademarks of the respective
holders.
TRADEMARK NOTATION IN THIS MANUAL
Microsoft® Windows® 7 Operating system
Microsoft® Windows® 8 Operating system
Microsoft® Windows® 10 Operating system
Throughout this manual, Windows 7, Windows 8, and Windows 10 refer to above
respective operating systems. In some cases, Windows refers generically to Windows 7,
Windows 8, and Windows 10.
NOTICE
No part of this manual may be copied or reproduced without authorization.
The contents of this manual are subject to change without notice.
Please notify us if you should find any errors in this manual or if you have any comments
regarding its contents.
MANUFACTURER
CONTACT INFORMATION
Contact information is described in “SUPPLIERS” in the first pages of the following
manual:
Robot System Safety and Installation Read this manual first

Epson RC90 Specifications

General

Brand	Epson
Model	RC90
Category	Controller
Language	English