Epson RC90

2. Installation
66 RC700 / RC90 Option Fieldbus I/O Rev.14
Setting on slave side
27. Right-click [netDevice]-<EPSON TSERIES…> icon.
Select [Configuration…].
28. The [Configuration] dialog box appears.
29. Select [Configuration]-[Connection]-[Poll] tab.
30. Enter the settings of the slave side and click <OK>.
Poll connection configuration
Item
State
Consumption
Checked
Consumption - Size
20
Consumption - Connection Path
User Defined Consumption Data
Production
Checked
Production - Size
20
Production - Connection Path
User Defined Production Data
31. Close the [Configuration] dialog box.