Epson SC-F9200 series

SC-F9200 Series Revision B
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 110
SE Group Confidential (Related Staff Only)
3.4.3.7 Left Rear Cover
1. Remove the screw, and remove the Left Rear Cover in the direction of the arrow.
A) Silver M4x10 S-tite screw with washer: 1 pcs
Figure 3-29. Removing the Left Rear Cover
Insert the three tabs of the Left Rear Cover into the three
positioning holes on the Left Upper Cover.
A
- Left rear side -
Left Upper Cover
Left Rear Cover
Tabs