Epson SC-F9200 series

SC-F9200 Series Revision B
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 163
SE Group Confidential (Related Staff Only)
3.4.5.10 CR Motor Cooling Fan
1. Remove the Media Loading Lever. (p210)
2. Remove the Right Upper Cover. (p103)
3. Remove the two screws that secure the CR Motor Cooling Fan.
A)Silver M4x30 Bind machine screw: 2 pcs
4. Release the cable from the two clamps.
5. Disconnect the cable from the relay connector.
6. Remove the CR Motor Cooling Fan.
Figure 3-102. Removing the CR Motor Cooling Fan
CR Motor
Cooling Fan
A
A
Cable
Clamps
Relay connector