SC-F9200 Series Revision B
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 188
SE Group Confidential (Related Staff Only)
8. Select Switch between Ink cartridges and Ink tanks.
Select Single channel -> Ink Holder 1 (Home) -> Cyan/Yellow, Magenta/
Black and Ink Tank, and press the [Run] button to validate the ink tanks. (p329)
9. Turn off the printer.
10.
Remove the four ink cartridges for service. (p207)
11. Install the ink tanks. (p207)
12. Lower the lock levers.
13. Turn on the printer.
14. Confirm that there are no errors.
To Next Page
Loading...
