SC-F9200 Series Revision C
PRODUCT DESCRIPTION Control Panel 32
SE Group Confidential (Related Staff Only)
Printer Setup
Heat Off Timer 15 - 240 min
Turns to the sleep mode automatically when no error is
occurring, no print job receiving or there are no operations on
the control panel. In this setting, sets the time to turn to the sleep
mode automatically. When the printer turns to the sleep mode,
the screen display on the control panel disappears, and all
Heaters and internal motors turn off to reduce power
consumption. When the optional additional dryer is installed,
the fan stops in the sleep mode. Button operations on the control
panel (except [P] button) recovers the screen display on the
control panel. However, when there are no operations in this
condition, the screen display disappears again in about 30
seconds. The printer wakes from the sleep mode completely and
recovers normally, only when the operation with a hardware
operation is executed such as receiving a print job or operating
the Media Set Lever.
Restore Settings
Yes
When this is set to [Yes], returns the set values in [Printer
Setup] menus to their factory default.
No
Maintenance
Nozzle Check
Print
Prints the check patterns. Check them visually and execute head
cleaning when blurring or space can be seen.
Print At Right
Print At Center
Print At Left
Table 1-17. Setup Menu
Menu Menu Item/Setting Values (shaded one is the default) Explanation
To Next Page
Loading...
Need help?
General