Epson SC-P5000 SERIES User Manual

SpectroProofer Menu
The following menus are only displayed when the optional SpectroProofer mounter is installed.
U “SpectroProofer” on page 119
Menu item Description
SProofer Status Device Version:ILS xxxxxx
Calibration Tile S/N xxxxxx
Firmware Version xxxxxx
Device Temperature XX°C
Air Temperature XX°C
Backing Color Displays the installed backing colors.
Calibration Status
Shows either Successful or Failed
Network Setup Menu
U “Network Setup” on page 119
Items indicated by *1 are displayed when Show is selected in the Network Settings.
Items indicated by *2 are displayed when Panel is selected in the IP Address Setting.
Menu item Description
Network Settings Hide, Show
IP Address Setting
*1
Auto, Panel
IP, SM, DG Setting
*2
IP Address, Subnet Mask, Default Gateway
Print Status Sheet
*1
Press Z to start printing.
Init Network Setting
*1
Reset with the Z button
Preferences Menu
U “Preferences” on page 120
Menu item Description
Language Lists the supported languages.
Length Units Metric, Feet/Inch
Temperature Units °C, °F
SC-P5000 Series User's Guide
Using the Control Panel Menu
109

Epson SC-P5000 SERIES Specifications

General

Max Print Resolution	2880 x 1440 dpi
Connectivity	USB, Ethernet
Operating Systems	Windows, macOS
Max Print Size	17" wide
Ink Palette	Cyan, Yellow, Light Cyan, Light Light Black, Matte Black, Photo Black
Media Types	Fine art paper, photographic paper, canvas
Ink Type	UltraChrome HDX pigment ink
Number of Ink Colors	10 (with Light Light Black)