Size
Paper
Thickness
Number of
sheets
Borderless Types of ink Calibration Mounter
A4
0.48 mm -
✓
*1
PK/MK
-
✓
*2
A3+
✓
A2 -
*1 You can specify and perform borderless printing; however, margins may appear or the print quality may
decline due to the paper expanding or contracting.
*2 Operations are guaranteed (color measurements are not guaranteed).
Supported Commercially Available Paper
When using commercially available paper, make sure you register the paper information.
U “Before Printing on Commercially Available Paper” on page 174
This printer supports the following paper specifications for non-Epson media.
c
Important:
❏ Do not use paper that is wrinkled, scuffed, torn, or dirty.
❏ Although plain paper and recycled paper manufactured by other companies can be loaded and fed in the
printer as long as they meet the following specifications, Epson cannot guarantee the print quality.
❏ Although other paper types manufactured by other companies can be loaded in the printer as long as
they meet the following specifications, Epson cannot guarantee the paper feeding and print quality.
❏ When using the SpectroProofer mounter, see the documentation supplied with your software RIP.
Roll Paper
Roll core size 2 inch and 3 inch
Roll paper outer diameter 2-inch core: 103 mm or less
3-inch core: 150 mm or less
Paper Width 203 mm (8 inches) to 432 mm (17 inches)
Paper Length 2-inch core: 45 m or less
3-inch core: 30.5 m or less
Paper Thickness 0.08 mm to 0.50 mm
Cut sheet
Paper Width 203 mm (8 inches) to 432 mm (17 inches)
Paper length 254 mm (10 inches) to 610 mm (24 inches)
Paper Thickness 0.08 mm to 1.50 mm (0.8 mm to 1.5 mm for thick paper)
SC-P5000 Series User's Guide
Appendix
173
To Next Page
Loading...
Need help?
General
