Item Description
Refresh Margin
On
*
This setting is effective for roll paper only.
After printing borderless on all edges, select whether to cut
automatically (On) or not to cut (Off) the leading edge of
the paper to remove any marks which may have been left in
preparation for the next job when printing with margins.
Off
Custom Paper
Set all items in the following table for commercially available paper based on the characteristics of the paper.
When customizing paper settings for genuine Epson paper, select the corresponding paper type from Select
Reference Paper, and then enter your settings.
* Default setting
Item Description
Select Reference
Paper
Photo Paper,
Proofing Paper, Fine
Art Paper, Matte
Paper, Plain Paper,
Others
You can select the media type that is the closest to the paper you are using.
Platen Gap
Standard
*
Select the Platen Gap, which is the distance between the print head and the
paper. Normally, select Standard. Select a wider setting if print results are
scratched or smudged.
Wide
Wider
Thickness Pattern Press the Z button to print a pattern to determine the thickness of the
current paper. Select the pattern number with the least misalignment from
the print results.
In the following example image, "4" is the best choice.
SC-P5000 Series User's Guide
Using the Control Panel Menu
115
To Next Page
Loading...
Need help?
General
