Epson SC-P5000 SERIES

Error messages What to do
Call For Service
Code XXXX
Power off and then on.
If this does not work, note the
code and call for service.
A call for service occurs when:
❏ The power cable is not connected securely
❏ An error that cannot be cleared occurs
When a call for service has occurred, the printer automatically stops printing. Turn off
the printer, disconnect the power cable from the outlet and from the AC inlet on the
printer, and then reconnect. Turn on the printer again multiple times.
If the same call for service is displayed on the screen, contact your dealer or Epson
Support for assistance. Tell them the call for service code is "XXXX".
SC-P5000 Series User's Guide
Problem Solver
149