Figure 3-10. Reel Unit
Reel Unit (p. 184)
Roll Paper Holder (p. 185)
Sub-F Board (Reel) (p. 186)
Relays the connection between the Main Board and the
Reel Unit. See “6.1 Block Wiring Diagram (p291)” for
specific connections to the concerning parts/components.
Reel Motor (p. 188)
Rewinds the media.
Tension Bar Upper Sensor / Tension Bar Lower Sensor (p. 191)
Detects the position of the Tension Bar to control the rewinding
operation of the Reel Motor.
To Next Page
Loading...
Need help?
General