Epson Stylus 10000 Series User Manual

Loading Plain Paper
The following procedure describes how to load plain paper
(copier-quality or paper specifically designed for ink jet
printers), which works well for most color printing. To load
coated papers for higher-quality output or to load
transparencies and other special papers, see Chapter 2.
1. Open the sheet feeder cover by lifting the lever on the left
until it clicks into place. Then slide the left edge guide as far
to the left as it will go.
2. Fan a stack of paper; then tap it on a flat surface to even the
edges.
Note:
The sheet feeder holds up to 100 sheets of 17-lb or 64-gm
2
paper.
Do not load paper above the mark on the edge guide.
1-12
Setting Up

Epson Stylus 10000 Series Specifications

General

Paper Capacity	100 sheets
Media Type	Plain paper, envelopes, transparencies
Paper Sizes	A4, A5, B5, Letter, Legal
Interface	Parallel
Operating Systems	Mac, Windows