EPSON Stylus CX3100/3200 Revision A
Adjustment Adjustment by Adjustment Program 71
5.2.14 EEPROM Data
With this function, even in error status, you can check the data in EEPROM or write
data in it by directly designating addresses in EEPROM. (But if the CPU of the Main
Logic Circuit, I/F Receiver, RAM or EEPROM is broken down, this function can not
be used.)
Check “EEPROM data” in the additional function menu, and the following menu will
be indicated.
The EEPROM data function has the following two functions:
Checking the data in EEPROM
You can check the data in EEPROM in the range of designated addresses.
Designate the addresses at which you want to check the data and click the [OK]
button, and the data in EEPROM will be read from the printer and displayed on the
screen.
Inputting data in EEPROM
You can write data to change the value at the designated address in EEPROM.
But, use this function on special occasions only. If data is changed carelessly,
trouble can occur.
To Next Page
Loading...
Need help?
General
