-80
CUT. REPLACE
Displays the procedure for replacing the paper cutter. Follow the
instructions on the LCD panel.
HEAD ALIGNMENT MENU
This menu contains the following items.
PAPER THICK.
Adjusts the paper thickness of the paper that you are going to use.
If you use EPSON special media and its paper thickness is 0.2mm
or 1.2mm, select STD. If you use non-EPSON special media, enter
the paper thickness in the range of 0.0 to 1.6mm.
PAPER GROUP
Select A, B, or C according to the media you use.
To Next Page
Loading...
