Epson STYLUS PRO 9400 - Page 55

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 55
1.4.4.2 Panel Setting Mode Items List
Table 1-37. Panel Setting Mode Items List
Top menu (Panel display) Item menu Panel display Set value (Underline: Default) Ref.
Printer Setting Menu
(PRINTER SETUP)
Remaining paper detection function (Roll paper)
ROLL PAPER
COUNTER
ROLL PAPER LENGTH
---, 5.0~20
~99.5m
---, 15~60
~300ft
p.61
ROLL LENGTH ALERT
1~2~15m
3~7
~50ft
PG setting PLATEN GAP NARROW, STANDARD
, WIDE, WIDER, WIDEST
p.62
Page line PAGE LINE ON, OFF
p.64
IF switching INTERFACE AUTO
, USB, IEEE1394, OPTIONAL I/F CARD
p.64
Code Page Switching CODE PAGE PC437, PC850
p.65
Roll Paper Margin Setting
ROLL PAPER
MARGIN
DEFAULT
, TOP/BOTTOM 15mm, TOP /BOTTOM
35/15mm, 15mm, 3mm
p.65
Paper Width Detection
PAPER SIZE
CHECK
ON, OFF
p.67
Skew Error Detection
PAPER SKEW
CHECK
ON
, OFF
p.68
Job Time Out Setting TIME OUT OFF, 30sec, 60sec, 180sec, 300sec
p.68
Cutter Position Adjustment
CUTTER
ADJUSTMENT
EXEC
p.69
Auto Margin Refresh REFRESH MARGIN ON, OFF
p.70
Auto Nozzle Check Pattern for Each Job
AUTO NOZZLE
CHECK
OFF
, ON
p.70
Cleaning when nozzle checked AUTO CLEANING ON, OFF
p.71
Super Low Speed Cut Mode QUIET CUT OFF
, ON
p.71
Printer Setup Value Initialization
INITIALIZE
SETTINGS
EXEC
p.72
Test Print Menu
(TEST PRINT)
Nozzle Check Pattern Print NOZZLE CHECK PRINT
p.72
Status Print STATUS SHEET PRINT
p.74
Job Information Print JOB INFORMATION PRINT
p.76
User Paper Print CUSTOM PAPER PRINT
p.78
Continued to next page