154
Setting Options Description
Head Cleaning Set Proceed Select Yes to move the platen and print
head to the maintenance position
before replacing the head cleaning set
Head Cap Cleaning Yes
No
Select to move the platen and print
head to the maintenance position
before cleaning the caps
Cleaning Around Head Yes
No
Select to move the platen and print
head to the maintenance position
before cleaning around the head
Waste Ink Counter — Select to reset the waste ink counter
after replacing the waste ink bottle
Tube Washing White Ink
Color Ink
Select to run the tube washing utility to
remove accumulated sediment in the
selected ink tube.
Replace White Ink Yes
No
Select to switch the printer from white
ink mode to color mode or vice-versa
Storage Mode Yes
No
Select if you have stored the printer for
a long time (one month or more) so you
can replace the cleaning fluid
Parent topic: Using the Control Panel Menus
Related references
Optional Equipment and Replacement Parts
Related tasks
Washing the Ink Tubes
Performing a Nozzle Check
Cleaning the Print Head
Shaking and Replacing the Ink Cartridges
Replacing the Waste Ink Bottle
Replacing the Head Cleaning Set
Cleaning the Suction Cap
Storing the Printer
To Next Page
Loading...
Need help?
General
