82
1. Check that the shirt is loaded correctly.
2. Make sure the start light is on.
3. Press the start button.
Parent topic: Loading a T-shirt
Related topics
Loading a T-shirt
Cancelling a Print Job
You can cancel a print job or cancel data that is being received by the printer using the printer's control
panel.
Note: You cannot cancel printing from the Garment Creator software once the computer has finished
sending data to the printer. See the Garment Creator online help for more details.
1. Press the cancel button on the printer's control panel.
2. Press the up or down arrow button to highlight Yes, and press the OK button.
Printing stops immediately and data is deleted.
Note: If you are transmitting data from a USB memory device or printing from the USB File List
menu on the control panel, you can print the same data continuously after the specified number of
copies have been printed. To print different data, press the cancel button to cancel the data
received by the printer.
Parent topic: Loading a T-shirt
Finishing a T-shirt
Follow the instructions in these sections to remove your T-shirt from the printer and fix the ink.
Removing a Printed T-shirt
Fixing the Ink
Parent topic: Basic Printing
Removing a Printed T-shirt
After you print an image on a T-shirt, remove it from the printer.
To Next Page
Loading...
Need help?
General
