38
L, M (standard), S, and XS platens
1 0.24 inch (6 mm) margins
2 Platen frame
3 Printable area
Parent topic: Creating Your T-shirt Design
Preparing Your Printer
Before transmitting print data from the Garment Creator software, check the printer's status and make
sure that the print head nozzles are not clogged.
Perform a nozzle check to check for clogged nozzles and run a cleaning if necessary.
Attaching the Grip Pad to the Platen
Removing the Grip Pad from the Platen
Attaching or Removing Spacers
Installing the Platen
Attaching the Platen Frame Hooks
To Next Page
Loading...
