127
Note: Make sure Auto Cut is set to Off when you use the Auto Take-up function.
1. Turn on the printer.
2. Select > General Settings > Printer Settings > Paper Source Settings > Roll Paper Setup >
Roll 1 Function > Take-up.
3. Load roll paper in the Roll 2 unit.
4. Select the paper information area on the LCD screen and select Paper Setting > Roll 2 > Prepare
for Take-up > Proceed.
Note: Select How To... to view the instructions on the LCD screen.
5. Pull up the lock lever on the Roll 1 spindle.
Note: Make sure you pull the lock lever all the way up to unlock it completely.
To Next Page
Loading...
