314
The cutter moves into position and cuts off the protective piece. Remove the protective piece from
the printer.
Parent topic: Maintenance and Transportation
Related references
Optional Equipment and Replacement Parts (U.S./Canada)
Optional Equipment and Replacement Parts (Latin America)
Cleaning Your Product
You should clean the exterior of your printer about once a month to keep the product in optimum
condition.
Note: Do not use volatile chemicals, such as alcohol or paint thinners, to clean the product.
1. Remove all the paper from the product.
2. Turn off the product, wait for the LCD screen to turn off, and unplug the power cable from the
electrical outlet.
3. Using a soft, clean cloth, wipe off any dust or dirt from the exterior of the product. To prevent dust
from accumulating, make sure to clean the area shown here.
To Next Page
Loading...
Need help?
General