73
Loading Roll 2 (Dual Roll Models Only)
You can load roll paper with a 2- or 3-inch core and a compatible width (see the link below). Load roll
paper onto the spindle before loading the roll paper in the printer.
Note: Roll 2 is not available on SureColor P6570E/T7770E.
1. Remove any tape and protective paper from the end of the roll. Make sure the paper is cut straight
across to avoid paper feeding problems.
2. Make sure Load paper is displayed on the home screen.
Note: When roll paper is not loaded, - - - is displayed.
3. Select - - - > Roll 2 > OK.
To Next Page
Loading...
Need help?
General