217
1. On the LCD screen, select > General Settings > Network Settings > Advanced > Shared
Folder.
You see this screen:
2. Enter the following information about the shared folder:
• Folder Name: Enter the network path to the shared folder. You are limited to 255 characters.
• User Name: Enter a user name for the computer.
• Password: Enter the password for the computer.
3. Select Proceed to set up the shared folder.
Setting Up a Shared Folder Using Web Config
You can set up a shared network folder using Web Config. The folder must already exist on a networked
computer accessible by the product.
1. Access the Web Config interface via a web browser.
2. Select Basic on the Print tab.
Note: If the Print tab is not present, check with your system administrator.
To Next Page
Loading...
Need help?
General