239
Setting Options Description
Platen Gap Auto
1.2
1.6
1.9
2.1
2.4
Select the distance between the print head
and the paper; displayed when using a
custom paper type
Top/Bottom Margins 3 mm
15 mm
20 mm
45 mm
Standard
Select the margin for the leading edge of the
printed image.
Depending on the paper type and printing
environment, colors may be uneven near the
leading edge if the margin is small.
Paper Suction –3 to +3 Select to adjust the printer's suction setting;
choose lower values for thinner papers
Paper Size Check On
Off
Select On to detect the paper width when
paper is loaded
Select Off when the paper roll is empty. This
allows you to set the paper width before
feeding the paper.
Auto Cut Follow Paper Source
Settings
Never Cut
Select Follow Paper Source Settings to
follow the cut settings in Printer Settings >
Paper Source Settings > Roll Paper Setup
> Cut Settings, or select Never Cut to cut
paper manually
Roll Core Diameter 2inch
3inch
Select the paper core size for the loaded roll
paper
Paper Eject Roller Auto
Use
Do Not Use
Select to control the paper ejection roller;
select Auto to use the roller automatically
depending on the type of Epson paper; select
Use to always use the roller to eject paper;
select Do Not Use when you are concerned
about damaging the print surface
To Next Page
Loading...
