243
Setting Options Description
Top/Bottom Margins 3 mm
15 mm
20 mm
45 mm
Standard
Select the margin for the leading edge of the
printed image.
Depending on the paper type and printing
environment, colors may be uneven near the
leading edge if the margin is small.
Paper Suction –3 to +3 Select to adjust the printer's suction setting;
choose lower values for thinner papers
Paper Size Check On
Off
Select On to detect the paper width when
paper is loaded
Select Off if a paper setting error occurs when
paper is correctly loaded. This allows you to
set the paper width before feeding the paper.
Auto Cut Follow Paper Source
Settings
Never Cut
Select Follow Paper Source Settings to
follow the cut settings in Printer Settings >
Paper Source Settings > Roll Paper Setup
> Cut Settings, or select Never Cut to cut
paper manually
Roll Core Diameter 2inch
3inch
Select the paper core size for the loaded roll
paper
Paper Eject Roller Auto
Use
Do Not Use
Select to control the paper ejection roller;
select Auto to use the roller automatically
depending on the type of Epson paper; select
Use to always use the roller to eject paper;
select Do Not Use when you are concerned
about damaging the print surface
Paper Feed Offset –1.0 to 1.50% Select the amount of offset necessary to
reduce banding on uneven color in printouts;
displayed when using a custom paper type.
Restore Default Settings — Restores advanced paper settings to their
default values; not available with custom
paper types
To Next Page
Loading...
