30
9 Network status icons; select to switch the network connection status
: No Ethernet connection
: Ethernet connection established
: No Wi-Fi connection
: Wi-Fi network error or the product is searching for a connection
: Wi-Fi connection established; the number of bars indicates signal strength
: No Wi-Fi Direct connection
: Wi-Fi Direct connection established
Note: Wireless LAN may not be supported depending on the specifications and destination. If this
is the case, use a wired LAN instead.
10 Displays the Maintenance menu
You can check and clean the print head nozzles, replace consumables, and clean parts.
11 Switches the home screen display
12 Turns the internal light on or off; turn on to check print in progress
13 Displays settings for feeding and cutting roll paper
14 Displays the Paper Setting menu
Select when loading, removing, setting, or adjusting paper.
15 Displays the Network Folder menu
Select to print a file from a shared network folder (shared folder must be set up in advance).
To Next Page
Loading...
Need help?
General