Epson SureColor SC-T3000

Menu item Description
Custom Paper
Setting
XXXXXXXXXXXX
XXXXXXXX
(name of custom
paper type)
Select Reference
Paper
Photo Paper Lists supported Epson
media.
Matte Paper
Plain Paper
Others
No Paper Selected No Paper Selected
Platen Gap Narrow, Standard, Wide, Wider
Detect Paper
Thickness
Press Z to start printing.
Paper Feed Adjust Pattern
Press Z to start printing.
Value -0.70 to +0.70%
Paper Suction -4 to 0
Roll Paper Tension Normal, High, Extra High
Remove Skew On, Off
Setting Name 22 characters or less (letters, numbers, and symbols)
Restore Settings Yes, No
Print Paper List
Press Z to start printing.
-Maintenance menu
U “Maintenance menu” on page 107
Menu item Description
Nozzle Check
Press Z to start printing.
Head Cleaning
Head Alignment Auto(Uni-D)
Press Z to start printing/alignment.
Auto(Bi-D)
Manual(Uni-D)
Press Z to start printing.
Manual(Bi-D)
Cutter
Maintenance
Adjust Cut Position -3 to 3 mm
Replace Cutter
Press Z to start move.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Using the Control Panel Menu
101