/Setup menu
U “Setup menu” on page 107
Menu item Description
Printer Setup Roll Paper Setup Auto Cut On, Off
Refresh Margin On, Off
Page Line On, Off
Roll Paper Margin Normal, Top15mm/Bottom15mm, Top 35 mm/Bottom 15
mm, Top 45 mm/Bottom 15 mm, 3mm, 15mm
Roll Paper Remaining On, Off
Remaining Alert 1 to 15 m (4 to 50 ft)
Advanced
Settings
Roll Paper Tension Low, Normal, High, Extra High
Less Head Scuffing On, Off
Drying Time Per Page 0 to 60 minutes
Paper Size Check On, Off
Media Skew Check On, Off
Store Held Job On, Off
Restore Settings Yes, No
Printer Status Firmware Version xxxxxxx,x.xx,xxxx
Option Status Displays the options connected.
Show Total Prints
XXXXXXX m
2
(XXXXXX ft
2
)
Print Status Sheet
Press Z to start printing.
Network Setup IP Address Setting Auto -
Panel IP Address, Subnet Mask, Default Gateway
Print Status Sheet
Press Z to start printing.
Restore Settings Yes, No
Power Settings Sleep Mode 5 to 180 minutes
Power Off Timer Off, 1 to 24 hours
Restore Settings Yes, No
Preference Language Lists the supported languages.
Unit: Length m, ft/in
Alert Lamp Setting On, Off
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Using the Control Panel Menu
102
To Next Page
Loading...
