Epson SureColor SC-T3000 User Manual

: An error occurred. Check the
message on the screen, and clear
the error.
: Non-genuine cartridge.
Epson recommends the use of
genuine Epson ink
cartridges.Epson cannot
guarantee the quality or reliability
of non-genuine ink.
2 Ink color codes
C:Cyan
Y:Yellow
M:Magenta
MK : Matte Black
PK : Photo Black
-
: The Maintenance Tab
The maintenance tab shows the status of the
Maintenance Box and is used to display the
Maintenance menu.
The Info Display Area
The maintenance tab info display area shows
Maintenance Box status and the approximate
amount of space remaining in the Mainte-
nance Box. The icons change as follows to
show errors or to warn when the Maintenance
Box is nearing the end of its service life.
Normal Warning or Error
1
1 Status indicators
Maintenance Box status is shown as follows.
: No error. The height of the
indicator corresponds to the
amount of space remaining.
: The Maintenance Box is nearing
the end of its service life. You need
to prepare a new Maintenance
Box.
: Maintenance Box is at the end of
its service life. Replace the
Maintenance Box with a new one.
Pressing the Z or Menu button when this tab
is selected displays the Maintenance menu.
U “Maintenance menu” on page 107
/
:The Setup Tab
The setup tab displays the IP address and
menus for various settings.
The Info Display Area
The setup tab info display area shows the IP
address currently assigned, if any.
Pressing the Z or Menu button when this tab
is selected displays the Setup menu.
U “Setup menu” on page 107
+
: The Enlarged Copy Tab
The enlarged copy tab is displayed only when a
scanner is connected.
Pressing the Z button when this tab is
selected displays the Enlarged Copy screen.
U “Enlarged Copy menu” on page 112
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Introduction
15

Epson SureColor SC-T3000 Specifications

General

Color	Yes
Printing colors	Cyan, Magenta, Matte black, Photo black, Yellow
Print technology	Inkjet
Maximum resolution	2880 x 1440 DPI
Page description languages	HP-GL/2, HP-RTL
Package depth	1125 mm
Package width	787 mm
Package height	825 mm
Package weight	60910 g
Media thickness	0.08 - 1.5 mm
Maximum print size	A1 (594 x 841 mm)
Paper tray media types	Plain paper
ISO A-series sizes (A0...A9)	A1, A2, A3, A4
ISO B-series sizes (B0...B9)	B2, B3, B4
Display	LCD
Country of origin	Japan
Maximum internal memory	256 MB
Sound pressure level (printing)	50 dB
Number of power supply units	1
Power consumption (standby)	0.4 W
Power consumption (typical)	54 W
Power consumption (PowerSave)	3 W
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Quantity per pack	1 pc(s)