Epson TM-L90-i Technical Reference Guide

36
*: Paper for high-speed printing. Depending on the memory switch (customized values) settings, this paper can
allow printing at the printer's maximum printing speed (Level 9: approximately 150mm/s).
Die-cut label paper/
Continuous label paper
 HD-75* (Nippon Paper Industries Co., Ltd.)
 HW76B* (Nippon Paper Industries Co., Ltd.)
 HW76C* (Nippon Paper Industries Co., Ltd.
 KL470* (NAKAGAWA MFG(USA).Inc.)
 KL80GT* (NAKAGAWA MFG (Germany). GmbH.)
 150HA* (Ricoh Co., Ltd.)
 Paper must not be pasted to the paper roll spool.
 If a manual cutter is used to cut paper with a thickness of 100μm or greater, the paper
will slide out of position easily. Take special care when cutting the paper.
 Using roll paper with an inside diameter of 25.4 mm {1"} or less may decrease the detec-
tion accuracy of the roll paper near-end sensor.
 To ensure high printing quality and performance, it is recommended that you make
changes to the printing density settings ("Customized value" on page 97
) according to
the roll paper that is used.

Epson TM-L90-i Specifications

General

Type	POS printer
Character size	0.99 x 2.4 mm
Print technology	Thermal
Maximum resolution	180 x 180 DPI
Country of origin	China
Autocutter durability	2 million cuts
Mean time between failures (MTBF)	180000 h
Product color	Gray
Maximum roll diameter	90 mm
USB port	Yes
USB connector	Micro-USB Type-A, Micro-USB Type-B, USB Type-A
USB 2.0 ports quantity	4
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Wi-Fi	No
Ethernet LAN data rates	10, 100 Mbit/s
Package depth	300 mm
Package width	190 mm
Package height	240 mm
Package weight	3000 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	195 mm
Width	145 mm
Height	148 mm