106
Notes on use
•When you initialize or change the printer settings, the printer is reset to reflect the settings. It
may take about 1 minute depending on the network settin gs or environment. Also, your
application may indicate power off during the time waiting for reset. In that case, wait for
about 1 m
inute, and then reconnect to the printer.
•Where wireless LAN communication is in heavy traffic, your application may falsely
recognize that the communication is disconnected and indicate power off due to response
delay. In that case, disable Power Save to improve the trouble.
Bluetooth Wireless Interface
Countries where this product can be used
521, 552 models
Austria, Belgium, Bulgaria, Czech, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Ireland, Italy, Latvia, Lithuania, Luxemburg, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, UK, Australia*, New Zealand*, Hong
Kong
* Products with an RCM mark only.
511, 551 models
Canada, USA
Specification
•Conforms to Bluetooth Specification Version 2.1 + EDR
•Bluetooth Power Class 2
•Built-in antenna
• Pass key setting is possible
•Device name setting is possible
In Italy, if used outside of own premises, general authorization is required.
To Next Page
Loading...
