Chapter 4 Handling
85
4
Battery malfunction
If the battery has been charged for about five hours but cannot be fully charged, it is considered
as a malfunction, and Charge LED flashes. If this happens, you cannot use the same battery pack
again. Replace with another battery pack.
* When Charge LED is flashing while the power is off, it indicates one of the two possible conditions:
battery malfunction or outside the temperature range allowed for charging. To distinguish battery mal-
function, turn the power on, set the roll paper, and check the Error LED and Charge LED while the roll
paper cover is closed.
Condition
When the power is ON When the power is OFF
Power LED Error LED
Charge
LED
Power LED Error LED
Charge
LED
Battery
malfunction
Outside the
temperature
range allowed
for charging
To Next Page
Loading...
