Chapter 2 Setup
47
2
User NV memory capacity
•1 KB (initial setting)
•64 KB
•128 KB
•192 KB
NV graphics memory capacity
•None
•64 KB
•128 KB
•192 KB
•256 KB
•320 KB
•384 KB (initial setting)
Print density
Selectable from levels 1 to 13 (70% 130%) (initial setting: level 7)
Depending on the paper type, it is recommended to set the print density as shown in the table
below for the best print quality.
Original Paper Type Density Level
KT55F20, AF50KS-E 7 (100%)
P35024 8 (105%)
F5041(48), F5041(55) 9 (110%)
KT48F20 10 (115%)
P30023, P31023 12 (125%)
If the print density is set to a darker level, printing speed may be reduced.
If the print density is set to a darker level, paper dust accumulates on the print head and
print may be faint. For information about how to clean the thermal head, see "Cleaning
the Thermal Head" on page 90.
To Next Page
Loading...
