Appendix
107
Notes on use
Time required until printing starts
If the host computer and the printer are not connected on a continuous basis but rather
connected every time the printer starts printing, some time may be needed for the printer to
actually start printing after the host computer commands printing. This pause is the time
required for processing the connecti
on between the host computer and the printer, and it
depends on the conditions of the environment where used.
Timing to shut the connection off
If a connection between the host computer and the printer is shut off while the printer is offline,
it may not be re-established. In this case, first clear the printer offline causes, and then try to re-
establish the connection.
Notes when communicating with Android devices
•The printer cannot connect to Android 2.3 and 2.3.2.
•When communicating with Android 2.3.3 or later version s, communicate through an insecure
connection. Communication with the printer is not available for secure connection. To
establish insecure connection
, you need to use Android OS's API for communication that
supports insecure connection. Note that Epson's ePOS-Print SDK supports insecure
connection.
To Next Page
Loading...
