Epson TM-P80

46
Software Settings
With the customized values and memory switches, which are software settings for this printer,
you can set the various functions. For an outline of those functions, see the following section.
Use TM-P80 Utility, S oftware setting mode, or ESC/POS commands (“GS ( E“), to set the
customized values and memory switches.
TM-P80
Utility
Software
setting mode
ESC/POS
commands
Customized values
User NV memory capacity ✔✔
NV graphics memory capacity ✔✔
Print density ✔✔✔
Print speed ✔✔✔
Interface mode ✔✔
Column emulation mode ✔✔✔
Command execution during offline ✔✔✔
Automatic paper reduction ✔✔✔
Automatic power off time ✔✔✔
Battery charge mode ✔✔
Operation mode when battery is low ✔✔
Memory
switches
Transmission of status notice ✔✔✔
Buzzer Settings ✔✔✔
Error signal output ✔✔
Paper position immediately after specific
state function selection
✔✔✔
Paper position immediately after specific
state position selection
✔✔✔
USB Class ✔✔✔
Bluetooth interface ✔✔
 For detailed information about TM-P80 Utility, see the TM-P80 Utility User’s Manual.
 For information about how to use the Software setting mode, see "Software Setting
Mode" on page 74.
 For detailed information about ESC/POS commands, see the ESC/POS Command
Reference (see "ESC/POS Commands" on page 56).