Chapter 1 Product Overview
19
1
Offline
The printer automatically goes offline and stops printing under the following conditions. Once
all of the following conditions are cleared, the printer becomes online and ready to print.
•During power on until the printer is ready
•While roll paper is being fed using the Feed button
•When the roll paper cover is open
•When paper is out
•When an error has occurred
•While waiting for the switch for executing the macro to be on
•While the printer is shutting down
•When the remaining battery charge is at level E
•When the battery malfunction is detected
The Error LED lights during offline. However, it flashes when an error has occurred.
For details about the battery charge levels and operation modes, see "Operation Mode
When Battery is Low" on page 21.
You can select whether or not to stop command processing off-line with the customized
value. To set the customized value, see "Software Settings" on page 46.
The buzzer beeps five times when there is no more paper or an error has occurred. You
can disable the buzzer with the memory switches. For details on the memory switch
settings, see "Software Settings" on page 46.
To Next Page
Loading...
