Epson TM-T70II - Memory Switches; R;E Information Print Mode

Chapter 5 Replacement of the TM-T70
103
5
Memory Switches
For the TM-T70II, the following memory switches are added.
•Multi-tone print density
•Initial value of the character code table
•Initial value of the international character set
•Buzzer
•USB class
•Interface mode
•Paper autocutting after closing the cover
•Automatic paper-saving (upper space reduction)
•Automatic paper-saving (lower space reduction)
•Aut
omatic paper-saving (line space reduction rate)
•Automatic paper-saving (line feed reduction rate)
•Automatic paper-saving (barcode height reduction rate)
•Font A replacement
•Font B replacement
R/E Information Print Mode
The TM-T70II has a Recei pt Enhancement (R/E) Information Print mode that lets you confirm
the following information:
•Automatic top logo setting
•Automatic bottom logo setting
•Extended settings for automatic top/bottom logo
For detailed information about the memory switches, see "Setting the Memory Switches/
Receipt Enhancement" on page 54.