54
Setting the Memory Switches/Receipt Enhancement
With the memory switch and R/E (receipt enhancement) function, which are software settings
for this printer, you can set the various functions.
For an outline of the functions, see the following section. Use the methods shown in the table
below; TM-T70II Utility, Me mory S witch Setting Mode, or ESC/POS comman
ds, to set the
memory switches and R/E functions.
Item\Method
TM-T70II
Utility
Memory
Switch
Setting Mode
ESC/POS
Commands
Memory Switches
Receive buffer capacity
✔✔✔
BUSY condition
✔✔✔
Processing when data receive error ✔✔✔
Auto line feed
✔✔✔
USB power-saving function
✔✔✔
Release condition of receive buffer BUSY ✔✔✔
Paper sensor to output paper-end signals default*
1
✔✔
Error signal output ✔✔✔
Customized Values
Print density ✔✔✔
Multi-tone print density
✔✔✔
Print speed ✔✔✔
Number of head energizing parts ✔
Thai character print mode*
2
✔✔
Character code table default ✔✔✔
International character default ✔✔✔
Interface selection
✔✔
Autocutting after closing cover ✔✔✔
Paper reduction
✔✔✔
Font A auto replacement
✔✔
Font B auto replacement ✔✔
Buzzer
✔✔✔
TM-T88V command-compatible mode*
3
✔✔
Communication condition of serial interface ✔✔✔
Communication condition of USB interface
✔✔✔