Epson TM-T70II - Adjusting the Buzzer Volume; Setting the Optional External Buzzer

Chapter 2 Setup
67
2
5
Peel off the sticker on the other side of the affixing tape, and attach and
fix the optional external buzzer to the printer case.
6
Turn on the printer.
7
Make settings for the optional external buzzer on the printer.
Adjusting the Buzzer Volume
Turn the volume adjustment knob to adjust the buzzer volume.
Setting the Optional External Buzzer
You need to set the memory switches for buzzer enable/disable setting, sound pattern setting,
and frequency setting. For information about the memory switches, see "Setting the Memory
Switches/Receipt Enhancement" on page 54.
 To use this product, be sure to enable the optional external buzzer with the printer set-
ting.
 When the optional external buzzer is enabled with the printer setting, the drawer cannot
be driven.
Printer case
Volume adjustment knob
High
Low