24
Memory Switches
With the memory switches, which are software switches for the printer, you can configure
various settings of the printer. For information about the memory switches, see "Setting the
Memory Switches/Receipt Enhancement" on page 54.
R/E (Receipt Enhancement)
Graphics, such as shop logos to be printed on top or bottom of receipts can be registered.
For information about R/E, see "Setting the Memory Switches/Receipt Enhancement" on page
54.
User-defined Page
You can store character data in the user-defined page (character code table: page 255) so that you
can also print characters not resident in the printer.
Maintenance Counter
With this function, printer information, such as the number of lines printed, the number of
autocuts, and printer operation time after the printer starts working, is automatically stored in
NV memory. You can read the information with the Status API of the APD or OPOS ADK to use
it for per
iodical checks or part replacement.
For the character code table, see "Character Code Tables" on page 112.
User-defined page is not supported by South Asia font models.
Maintenance Counter can be checked with the TM-T70II Utility or in a self-test.