32
Printable Area
80 mm paper width printing
<180 dpi model>
In 2-divided energizing, the print position within the printable area of the thermal elements
for dots 1 to 256 and 257 to 512 is shifted approximately 0.07 mm {0.0028"} as shown in the
figure below in the paper feed direction.
<203 dpi model>
In 2-divided energizing, the print position within the printable area of the thermal elements
for dots 1 to 288 and 289 to 576 is shifted approximately 0.06 mm {0.0024"} as shown in the
figure below in the paper feed direction.
79.5 0.5 mm
0.141 0.05 mm
72.2
0.2 mm
(3.65 mm) (3.65 mm)
79.5 0.5 mm
0.125 0.05 mm
72 0.2 mm
(3.75 mm) (3.75 mm)