Epson TM-T70II Technical Reference Guide

Chapter 5 Replacement of the TM-T70
99
5
Logo Registration
The TM-T70II can register logos in the NV memory (NVRAM) with the TM-T70II Utility, w hile
the TM-T70 can register logos with the TM Flash LOGO Setup Utility for NVRAM (TM-Flogo).
Driver Compatibility
You can operate the TM-T70II with a driver for the TM-T70 (APD Ver.3xx or later or APD Ver.4.54
or later).
Advanced Printer Driver
When the TM-T70 was controlled by APD Ver. 4.00 ~ 4.53, you need to install APD Ver.4.54 or
later versions.
OPOS ADK
If the TM-T70 was controlled by an OPOS ADK, you can replace it with the TM-T70II without
modifying the OPOS ADK.
USB Power-Saving Function
With the TM-T70II, you can enable the USB power-saving function with the memory switch.
Maintenance Counter
For the TM-T70II, “Number of lines fed (when the print head was replaced)” is added.
Buzzer
For an application that can beep an internal buzzer of the TM-T70, the application can also beep
an internal buzzer or optional external buzzer of the TM-T70II without any changes of the
application. TM-T70II is available with an internal buzzer or without the buzzer. Even if you
purchase the one without the buzzer, you can attach an optional external buzzer. You can beep
For detailed information about the TM-T70II Utility, see the TM-T70II Utility User’s Manual.
You cannot operate the TM-T70 with a driver for the TM-T70II.

Epson TM-T70II Specifications

General

Type	POS printer
Print technology	Thermal
Maximum resolution	180 x 180 DPI
Product color	Gray
Maximum roll diameter	83 mm
Maximum printing width	79.5 mm
USB port	Yes
USB connector	USB Type-B
Standard interfaces	Serial, USB 2.0
Serial ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Safety	EN, TÜV, GOST-R
Certification	CE, GOST-R, EN55022
Country of origin	China
Autocutter durability	1.7 million cuts
Sound pressure level (printing)	55 dB
Mean time between failures (MTBF)	360000 h
AC input voltage	24 V
Power consumption	2000 mA
Power source type	AC
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Ethernet LAN	No
Mean cycles between failures (MCBF)	65000000
Pallet width	800 mm
Pallet height	1816 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	112 pc(s)
Quantity per pallet (UK)	168 pc(s)
Quantity per pallet layer	16 pc(s)
Harmonized System (HS) code	84433210
Quantity per pallet layer (UK)	24 pc(s)
Package depth	253 mm
Package width	192 mm
Package height	240 mm
Package weight	2600 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	194 mm
Width	125 mm
Height	114 mm