62
Data bit
•7 bits
•8 bits (initial setting)
Flow control
•DTR/DSR (initial setting)
• XON/XOFF
Communication condition of USB interface
•USB printer class
• USB vendor-defined class (initial setting)
Auto top logo
Key-code
Selectable from key-codes of registered logos
Alignment
•Left (initial setting)
•Center
•Right
Number of lines to be deleted below top logo
Auto bottom logo
Key-code
Selectable from key-codes of registered logos
Alignment
•Left (initial setting)
•Center
•Right
If set to 7 bits, printing from a printer driver is not possible.
TM-T70II Utility does not support the function for Number of lines to be deleted below top
logo.