60
Method
Paper
Feed
addFeedUnit
Adds a tag for paper feeding (in
dots).
●●82
addFeedLine
Adds a tag for paper feeding (in
lines).
● ● 83
addFeedPosition
Adds control of label paper/black
mark paper to command buffer
● - 84
addFeed
Adds a line feed to the command
buffer.
● - 86
Graphi-
c
addImage
Adds a tag for a raster image to be
printed.
●●87
addLogo
Adds a tag for an NV logo to be
printed.
● ● 89
Bar-
code
addBarcode
Adds a tag for a bar code to be
printed.
●●90
addSymbol
Adds a tag for a two-dimensional
code to be printed.
● ● 95
Ruled
line
addHLine
Adds a tag for a horizontal line to be
printed.
● - 101
addVLineBegin Adds a tag for starting a vertical line. ● - 103
addVLineEnd
Adds a tag for finishing a vertical
line.
● - 105
Page-
mode
addPageBegin
Adds a tag for switching to page
mode.
● - 107
addPageEnd Adds a tag for finishing page mode. ● - 108
addPageArea
Adds a tag for specifying the print
area in page mode.
- ● 109
addPageDirec-
tion
Adds a tag for specifying the print
direction in page mode.
- ● 111
addPagePosition
Adds a tag for specifying the print
position in page mode.
- ● 113
addPageLine
Adds a tag for drawing a line in
page mode.
- ● 115
addPageRect-
angle
Adds a tag for drawing a rectangle
in page mode.
- ● 117
Cut addCut Adds a tag for paper cut. - ● 119
Drawer
kick-
out
addPulse Adds a tag for the drawer kick-out. ● - 121
Elem-
ent
API Description
Stan-
dard
mode
page
mode
Pa-
ge