62
Numerical values to be set to parameters
In the ePOS-Print Builder object API, numerical values are set to some parameters. Set values with the
following in mind:
❏ Unit
Specify numbers in dots for units that represent length.
(Print position, paper feed space, width and height of images and barcodes, etc.)
❏ Range
Depending on the printer specifications, a specifiable range is predetermined. For details, refer to Printer
specifications (p.209).
❏ Resolution
The resolution varies depending on the printer. It affects the actual print size. The higher the resolution is,
the smaller the print size becomes, and vice versa. For each printer's resolution, refer to Printer specifica-
tions (p.209).
Element API Description Page
Property
halftone
Raster image halftone processing method
(in firmware Ver.1.2 and later)
134
brightness
Raster image brightness correction value
(in firmware Ver.1.2 and later)
135
force
Forced transmission mode
(in firmware Ver.3.0 and later)
136
message Message buffer 137
Constant
FONT_* font
ALIGN_* alignment
COLOR_* color specification
HALFTONE_* Halftone type (in firmware Ver.1.2 and later)
MODE_* Color mode (in firmware Ver.1.2 and later)
BARCODE_* bar code type
HRI_* HRI position
SYMBOL_* two-dimensional code type
LEVEL_* error correction level
LINE_* line style
DIRECTION_* page mode print direction
CUT_* paper cut type
DRAWER_* drawer kick-out connector
PULSE_* drawer kick-out pulse length
Constant
PATTERN_* buzzer sound pattern
FEED_* Paper feed position of label paper/black mark paper
LAYOUT_* Type of papers
To Next Page
Loading...
Need help?
General